COFFEE
How to Descale a Coffee Maker or Espresso Machine (2026): Drip, Keurig and Breville Steps, Plus 4 Descalers
If your coffee maker is brewing slower, running louder, tasting flat or flashing a descale light, the culprit is almost always scale: the chalky calcium and magnesium deposits that hard water leaves on heating elements and inside narrow water lines. Holiday season is a good time to deal with it, because guest-heavy weeks put extra miles on the machine and a new espresso machine under the tree will need its first descale within a few months. This guide explains what descaling is, how it differs from cleaning, how often the makers say to do it and the step-by-step routines published by Mr. Coffee for drip coffee makers, Keurig for pod brewers and Breville for the Barista Express espresso machine. At the end we compare four descalers sold on Amazon. We did not test these products ourselves; the steps come from the makers’ own instructions, which you should always check for your model.
Disclosure: This post contains affiliate links. If you buy through these links, we may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Quick Picks

Urnex Dezcal Powder
Best All-Round Descaler
Urnex Dezcal powder, 900 g: odorless descaling powder for drip coffee makers, espresso machines, pod machines and kettles, dosed at 1 oz per 32 oz of reservoir capacity.
Pros
- Dose to any reservoir size
- Odorless
Cons
- You measure it yourself

Urnex Liquid Dezcal
Best Liquid for Keurig and Home Machines
Urnex Liquid Dezcal, 33.6 oz: pre-mixed descaling solution with up to 8 uses for Keurig 1.0/2.0 brewers, home coffee and espresso machines, kettles and garment steamers.
Pros
- Pre-mixed, no measuring
- Up to 8 uses
Cons
- Unclear instructions reported

Keurig Descaling Solution
Best for Keurig Brewers
Keurig Descaling Solution: the maker’s citric-acid descaler, suggested every 3 months, odorless and finished in under 45 minutes.
Pros
- Made for Keurig brewers
- Citric acid, odorless
Cons
- Costs more per use than vinegar
How we researched this guide
We did not run lab or hands-on tests for this guide. Instead we read each product’s Amazon listing and the manufacturer’s published specifications, then looked for patterns in the customer feedback summaries that Amazon shows on each listing. Where a listing gives a number, we repeat it as the listing’s claim. Where we could not find reliable details, we say so rather than guess.
We checked every Amazon listing below on November 11, 2026. We read Mr. Coffee’s cleaning guide for drip coffee makers, Keurig’s descaling page, Breville’s U.S. instruction book for the Barista Express and the Amazon listings for Urnex, Keurig and De’Longhi descalers. We also looked at the questions people ask most: how often to descale, whether vinegar is safe, what the difference is between cleaning and descaling and why a machine still shows a descale light.
Read more about our method on our How We Research page.
The short answer
Descale a drip coffee maker about once a month with white vinegar and water, following Mr. Coffee’s method, then run two water-only brews. Descale a Keurig every 3 to 6 months, or when the descale light comes on, with Keurig’s solution or a compatible descaler. For an espresso machine, follow the maker’s descale mode and use the descaler it specifies; on the Breville Barista Express, that means descaling when the Clean/Descale light is solid, not flashing. Hard water means more frequent descaling, and a water filter can reduce how often you need to do it.
Choosing a machine? See our best drip coffee makers, our Keurig K-Elite review and our Breville Barista Express review, all part of our Coffee Guide.
Descaling vs cleaning: two different jobs
Cleaning removes coffee oils and grounds from the parts that touch coffee: the carafe, the filter basket, the portafilter and the group head on an espresso machine. Descaling removes mineral scale from the parts that touch hot water: the heating element or boiler, the pump and the water lines. You need both, on different schedules.
Breville’s Barista Express makes the difference explicit. Its instruction book says a flashing Clean/Descale light means the machine needs a cleaning cycle, which is a back-flush with a cleaning tablet in the portafilter, while a solid light means it needs descaling. Mixing them up is one of the most common reasons owners say a machine “still” asks to be descaled.
How often to descale
Keurig says descaling should take place every 3 to 6 months or, for select brewers, when the descale light comes on; the Keurig solution’s listing suggests every 3 months. Mr. Coffee recommends a once-a-month deep clean with vinegar for drip coffee makers. De’Longhi’s EcoDecalk listing suggests about every 3 months for an average household. Breville tells Barista Express owners to descale when the light is solid and notes that replacing the water filter every two months will reduce the need to descale. See Keurig descaling page, Mr. Coffee, How to Clean a Coffee Maker and the Breville Barista Express instruction book (PDF).
Treat those as starting points. If your water is hard, if the machine slows down or if you see white crust around the spout or in the reservoir, descale sooner. Some machines, including the Ninja Luxe Café, ship with a hard water test kit to help you set the schedule.
How to descale a drip coffee maker (Mr. Coffee method)
Mr. Coffee’s once-a-month method for drip coffee makers is simple and uses white vinegar:
1. Empty and prepare. Empty the carafe and clean out the filter basket. Add white vinegar and water to the reservoir; Mr. Coffee says to use around half as much vinegar as water.
2. Brew the solution. If your coffee maker has a Clean function, use it. If not, brew the mixture as if you were making a full pot of coffee.
3. Let it sit. When the cycle finishes, let the machine sit for 15 to 30 minutes, then pour out the vinegar mixture, discard the paper filter or rinse the permanent filter and rinse the carafe thoroughly.
4. Rinse twice. Run a full brew with plain water, empty it, then run a second water-only brew. Mr. Coffee says that two water-only brews remove the remaining vinegar.
Mr. Coffee also mentions lemon juice mixed with equal parts water as an alternative, and recommends washing the carafe and removable parts after every use. Some newer drip models with a Clean button specify undiluted vinegar in their manuals, so check yours. See Mr. Coffee, How to Clean a Coffee Maker.
How to descale a Keurig
Keurig’s guidance is to descale every 3 to 6 months, or when the descale light comes on for brewers that have one. Its descaling solution is a citric-acid liquid that the listing says works in under 45 minutes and leaves no odor. The usual routine is to empty the reservoir, remove any water filter, pour in the descaling solution plus water as the bottle directs, run cleansing brews without a pod into a large mug and discard each one, let the machine stand, then rinse the reservoir and run fresh-water cleansing brews. The exact number of brews and the standing time depend on your model, so follow the instructions for your brewer. See Keurig descaling page.
If you use a third-party descaler, choose one sold as compatible with Keurig brewers, such as Urnex Liquid Dezcal, which lists Keurig 1.0 and 2.0 compatibility.
How to descale an espresso machine (Breville Barista Express example)
Espresso machines have more parts to protect: a boiler or thermocoil, a pump, a steam wand and a hot water outlet. Most have a dedicated descale mode, and makers specify their own descaler. Breville’s Barista Express instruction book gives this routine for when the Clean/Descale light is solid:
1. Prepare the solution. Dissolve one Breville descaling powder sachet in 34 fl oz (1 L) of water and fill the water tank.
2. Enter descale mode. Press and hold the 2 CUP button, then press and hold the POWER button at the same time. The machine heats up and the POWER button flashes until it is ready.
3. Descale the group head, steam wand and hot water outlet. Press 1 CUP to run solution through the group head for about 25 seconds, then turn the steam dial toward steam (about 13 seconds) and toward hot water (about 8 seconds). Repeat these steps until the tank is empty; Breville says not to remove or completely empty the tank during descaling.
4. Rinse. Remove and rinse the tank, refill it with fresh cold water to the maximum (68 fl oz / 2 L) and repeat the same steps to flush out any remaining solution.
Breville also recommends replacing the water filter every two months, more often in hard-water areas, to reduce the need to descale. Other espresso machines differ, so always use your own manual. See the Breville Barista Express instruction book (PDF).
Can you use vinegar?
For drip coffee makers, yes: Mr. Coffee’s own method uses white vinegar, and it is cheap and effective. The downside is the smell, which is why both makers and descaler brands stress the water-only rinse cycles afterward.
For espresso machines and pod brewers, check the manual first. Breville’s instructions call for its own descaling powder, and makers and descaler brands such as Urnex and De’Longhi sell purpose-made descalers that are odorless and formulated for heating elements and seals. If a manual specifies a particular descaler, using it keeps you on the safe side of the warranty.
Water quality: the best way to descale less
Scale comes from minerals in your water, so the harder your water, the faster it builds up. Using the water filter that came with your machine and replacing it on schedule, as Breville recommends for the Barista Express, is the simplest prevention. Some owners use filtered or bottled water; check your manual, because Breville says to remove its filter if you use filtered or bottled water.
Kettles scale up too, and several descalers below list kettles as compatible. If you are shopping for one, see our best electric kettles guide.
Descalers compared
| Descaler | Form and size (listing) | Dose or uses (listing) | Notes |
|---|---|---|---|
| Urnex Dezcal powder | Powder, 900 g bottle | 1 oz of powder per 32 oz of reservoir capacity | Odorless; for drip, espresso, pod machines and kettles |
| Urnex Liquid Dezcal | Liquid, 33.6 oz bottle | Up to 8 uses | Lists Keurig 1.0/2.0, espresso machines, kettles and steamers |
| Keurig Descaling Solution | Liquid, citric acid | Use every 3 months, per listing | Made for Keurig brewers; under 45 minutes |
| De’Longhi EcoDecalk | Liquid, lactic acid, 16.9 oz | Listed as a 15-month supply at about every 3 months | Works with other brands such as Breville and Ninja, per De’Longhi |
Sources: the Amazon listings for each product, Keurig descaling page and the Breville Barista Express instruction book (PDF).
The complete reviews
Urnex Dezcal Descaling Powder, 900 g Bottle
Best All-Round Descaler
According to the Amazon listing, Urnex Dezcal is a powder descaler compatible with Keurig, Nespresso, Breville, Jura, De’Longhi and other drip coffee makers, espresso machines, super-automatics and kettles. Urnex says it removes limescale faster than vinegar and is odorless, and directs owners to use 1 ounce of powder per 32 ounces of reservoir capacity.
A big bottle of powder is the economical choice if you descale more than one appliance, because you dose it to the size of each reservoir. It avoids vinegar smell entirely.
Amazon’s customer summary says owners find it an economical alternative to single-use packets that removes buildup without residue and improves taste; some mention it can stain stainless steel, and some say the instructions are unclear. Wipe spills promptly and follow your machine’s own descale steps.
Who it’s for: Owners of several machines (drip, espresso, kettle) who want an odorless, economical powder they can dose by reservoir size.
Who it’s not for: Anyone who wants single-dose packets instead of measuring powder; some owners mention staining on stainless steel.

Pros
- Dose to any reservoir size
- Odorless
- Works across many machine types
Cons
- You measure it yourself
- Some staining reports on stainless steel
Urnex Liquid Dezcal Activated Descaling Solution, 33.6 oz
Best Liquid for Keurig and Home Machines
According to the Amazon listing, Urnex Liquid Dezcal is a ready-to-use liquid descaler that provides enough solution for up to 8 descaling cycles and is compatible with Keurig 1.0 and 2.0 brewers, home coffee and espresso machines, kettles and garment steamers.
If you would rather pour than measure, this is the easy version of Dezcal, and the Keurig compatibility makes it a practical alternative to the brand’s own solution.
Amazon’s customer summary says owners find it effective on hard-water buildup, odorless and good value, while some report cloudy water after the first rinse and some find the instructions unclear. Run extra fresh-water rinses if needed.
Who it’s for: Anyone who prefers a pre-mixed liquid for Keurig 1.0/2.0 brewers, home espresso machines and kettles.
Who it’s not for: Owners whose machine maker requires its own branded descaler for warranty purposes; check your manual.

Pros
- Pre-mixed, no measuring
- Up to 8 uses
- Keurig 1.0/2.0 compatible
Cons
- Unclear instructions reported
- May need extra rinse cycles
Keurig Descaling Solution
Best for Keurig Brewers
According to the Amazon listing, Keurig’s descaling solution uses citric acid to remove mineral deposits without harming the brewer, is fast-acting and odorless, and is meant to be used every 3 months as part of a routine that takes under 45 minutes. Keurig’s own page recommends descaling every 3 to 6 months or when the descale light comes on.
For Keurig owners, the maker’s own solution removes any guesswork about compatibility and matches the instructions printed for your brewer.
Amazon’s customer summary says owners find it effective and easier than vinegar; some notice a lingering acidic taste, some find the process time-consuming and some find the small-print instructions hard to read. Value opinions are split.
Who it’s for: Keurig owners who want the maker’s own citric-acid solution and the simplest routine.
Who it’s not for: Espresso-machine owners; it is sold for Keurig brewers.

Pros
- Made for Keurig brewers
- Citric acid, odorless
- Clear routine from the maker
Cons
- Costs more per use than vinegar
- Some report lingering taste
De’Longhi EcoDecalk Universal Descaler, 16.9 oz
Best for Espresso Machines
According to the Amazon listing, EcoDecalk is a fast-acting descaler made with plant-based lactic acid, formulated to remove limescale and mineral deposits from espresso and coffee machines, and suitable for other brands such as Breville, Ninja and Philips. De’Longhi suggests descaling about every 3 months for an average household and calls the bottle a 15-month supply.
If you own a De’Longhi espresso machine, or simply want a descaler designed around espresso machines, EcoDecalk is the obvious pick; check your manual for the amount per cycle.
Amazon’s customer summary says owners find it effective on tough limescale, easy to dose and free of aftertaste; the main complaint is instructions that are not in English on some packages. Follow your machine’s descale program.
Who it’s for: De’Longhi owners and anyone who wants a lactic-acid descaler designed for espresso machines.
Who it’s not for: Drip-coffee owners who are happy with the maker’s vinegar method; it costs more per use than vinegar.

Pros
- Lactic acid, designed for espresso machines
- Easy to dose
- Compatible with other brands, per De’Longhi
Cons
- Some packages lack English instructions
- Costs more per use than vinegar
Frequently Asked Questions
How often should you descale a coffee maker?
Mr. Coffee recommends a monthly vinegar deep clean for drip coffee makers, Keurig says every 3 to 6 months or when the descale light comes on, and De’Longhi suggests about every 3 months for an average household. Descale more often if your water is hard or the machine slows down.
Can I use vinegar to descale my coffee maker?
Yes for most drip coffee makers; Mr. Coffee’s own method uses white vinegar followed by two water-only brews. For espresso machines and pod brewers, check the manual first, because many makers specify their own descaler.
What is the difference between cleaning and descaling?
Cleaning removes coffee oils and grounds from the parts that touch coffee. Descaling removes mineral scale from the heating element and water lines. On the Breville Barista Express, a flashing Clean/Descale light means a cleaning (back-flush) cycle, and a solid light means descaling.
Does using filtered water mean I never need to descale?
No, but it helps. Breville says replacing the Barista Express water filter every two months reduces the need to descale. Any water with minerals will leave some scale over time, so keep descaling on a schedule.
Conclusion
Descaling takes less than an hour and keeps your coffee hot, your machine quiet and your warranty intact. Use white vinegar for most drip coffee makers, the maker’s routine and a compatible descaler for Keurig brewers, and your espresso machine’s own descale program with the descaler it specifies. Urnex Dezcal is the all-rounder, Liquid Dezcal and Keurig’s solution suit pod brewers and De’Longhi EcoDecalk is built for espresso machines. Check current prices on Amazon before you buy.