COFFEE GRINDER COMPARISON

Fellow Ode Gen 2 vs Baratza Encore (2026): Which Burr Grinder Is Worth It for Brewed Coffee?

If you are upgrading from a blade grinder, or choosing a grinder as a gift for a pour-over fan this season, two names come up again and again: the Baratza Encore, the long-running entry-level conical burr grinder, and the Fellow Ode Gen 2, a stylish flat-burr grinder built only for brewed coffee. They cost very different amounts and are designed around different routines. The Encore holds a hopper of beans and grinds on demand for almost any method; the Ode is a single-dose grinder that you load with one brew’s worth of beans at a time, and it is designed to grind more precisely, more quietly and with less mess. In this comparison we explain flat versus conical burrs in plain language, compare the published specs side by side, summarize what Serious Eats found when it used the Ode Gen 2 daily for four months, and tell you which grinder fits which kind of coffee drinker. We did not test these grinders ourselves; specifications come from Fellow, Baratza’s spec sheet and the Amazon listings.

By · Updated November 13, 2026

How we chose: we compare maker specs, independent test data and owner feedback; we do not test products hands-on. How we research. Part of our Coffee Guide.

Disclosure: This post contains affiliate links. If you buy through these links, we may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.

Quick Picks

Chooselio graphic for Fellow Ode Gen 2

Fellow Ode Gen 2

Best for Daily Pour-Over and Drip (Single Dose)

Fellow Ode Gen 2: 64 mm flat burrs, 31 grind steps, 100 g single-dose load bin, anti-static technology, auto stop, magnetic catch cup, 2-year warranty plus 1 with registration.

Pros

  • Very consistent grind for brewed coffee
  • Anti-static system that reviewers found works

Cons

  • Not for espresso
Check Price on Amazon →
Chooselio graphic for Baratza Encore

Baratza Encore

Best Value and Most Repairable

Baratza Encore (ZCG485): 40 mm conical burrs, 40 settings from 250 to 1,200 microns, 300 g (10.6 oz) hopper, 120 g (4.2 oz) grounds bin, front pulse button, 1-year warranty, wide parts support.

Pros

  • Much lower cost
  • Hopper for grab-and-go grinding

Cons

  • Shorter 1-year warranty
Check Price on Amazon →

How we compared them

We did not run lab or hands-on tests for this guide. Instead we read each product’s Amazon listing and the manufacturer’s published specifications, then looked for patterns in the customer feedback summaries that Amazon shows on each listing. Where a listing gives a number, we repeat it as the listing’s claim. Where we could not find reliable details, we say so rather than guess.

We checked every Amazon listing below on November 13, 2026. We read Fellow’s Ode Gen 2 product page, Baratza’s official Encore spec sheet, the Amazon listings for both grinders and Serious Eats’ long-term Ode Gen 2 review, which measured grind consistency with a sifter. We also looked at the questions owners search for most: whether the Ode Gen 2 can grind espresso, how to clean and calibrate it, and what the alternatives are.

Read more about our method on our How We Research page.

The short answer

Buy the Baratza Encore if you want a dependable, repairable first burr grinder with a bean hopper that covers drip, pour-over, AeroPress, French press and occasional espresso-range grinding, for much less money. Buy the Fellow Ode Gen 2 if you brew pour-over or drip every day, are happy to weigh and single-dose your beans, and want flat-burr precision, low mess, quiet grinding and an automatic stop. Neither is the right grinder for espresso: Fellow says the Ode does not grind for espresso, and Baratza sells the Encore ESP for that job.

Still deciding whether you need a burr grinder at all? Start with our burr vs blade grinder guide, then see our best burr coffee grinders and the Coffee Guide.

Specs side by side

Fellow Ode Gen 2Baratza Encore (ZCG485)
Burrs64 mm stainless steel flat burrs, two-stage geometry40 mm hardened steel conical burrs, made in Europe
Grind settings11 settings, 31 total steps40 settings
Grind range (maker)About 250–300 microns and up250 to 1,200 microns
EspressoNot for espressoDescribed as espresso capable; Encore ESP is the espresso model
Bean loadingSingle dose, 100 g load bin300 g (10.6 oz) hopper
Grounds containerMagnetically aligned catch cup120 g (4.2 oz) grounds bin with fill line
Start and stopPress once; stops automaticallyOn/off switch plus front pulse button
Static and messAnti-static technology, built-in knockerLow retention design; no active anti-static
Motor140 W70 W DC motor, about 550 rpm burr speed
Size and weight239 x 105 x 248 mm; 4.6 kgFits under most cabinets
Warranty2 years, plus 1 with registration (US)1 year

Sources: the Fellow Ode Brew Grinder Gen 2 product page, the Baratza Encore spec sheet (PDF) and both Amazon listings. Baratza’s official product page lists a 300 g (10.6 oz) hopper, with an optional extender that adds 250 g.

Flat vs conical burrs, in plain English

Both grinders crush beans between two burrs rather than chopping them, which is why both are a big step up from a blade grinder. The difference is the shape. A conical burr grinder like the Encore uses a cone spinning inside a ring; it is easier to keep aligned, tolerant of everyday use and common in entry-level grinders. A flat burr grinder like the Ode uses two parallel discs; they can set a very precise gap and are common in commercial grinders.

In its four-month review, Serious Eats, Fellow Ode Gen 2 review screened 30 grams of coffee ground at a drip setting through sieves at 500 and 1,400 microns. More than 65% of the Ode Gen 2’s grounds fell into that ideal range, compared with 45% for the Baratza Virtuoso+, a step-up conical grinder that Serious Eats also likes. In blind tasting, both made sweet, balanced coffee, but the reviewer noticed clearer, more pronounced flavor notes from the Ode with light roasts.

That is the honest summary of the burr question: a more uniform grind can make light, fruity coffees taste clearer, but it does not automatically make every cup taste better. If you drink medium or dark roasts with milk, the difference will be harder to notice than if you brew light-roast pour-over black.

Hopper vs single dose: which routine suits you?

The Encore works like most grinders: fill the hopper with beans, set the grind by turning the hopper, and switch it on until you have enough, using the fill line on the bin as a guide. It is quick and familiar, and it is the better choice for a household where several people make coffee without weighing anything.

The Ode is built for weighing. You measure one brew’s worth of beans on a scale, pour them into the load bin, press the button and the grinder stops by itself when it is done. Fellow says this keeps the rest of your beans fresh in their bag, and the 100 g bin is large enough for a big batch of drip. The trade-off is an extra step every morning and the need for a scale.

If you do not already own one, our best coffee scales guide covers affordable options, and our best pour-over coffee makers pair well with either grinder.

Noise, static and cleanup

Static is what sends chaff and grounds onto the counter. Serious Eats, Fellow Ode Gen 2 review found that the Ode Gen 2’s active anti-static system, an ionizer similar to the one in a hair dryer, really worked: grounds fell neatly into the cup, and the chute only needed brushing after about three months. The reviewer also liked the grind chart under the lid, the clear dial and the auto-stop, but noted that the catch cup lid can be fiddly and that some owners have reported the cup’s magnet coming off.

Fellow markets the Ode as quiet because it has no noisy gearbox. Baratza says the Encore’s slow-turning burrs reduce heat, noise and static, but Amazon’s customer summary for the Encore shows mixed views on noise and says some owners find it clogs or is tricky to clean.

Amazon’s customer summary for the Ode Gen 2 is more mixed than the Serious Eats review: owners praise the consistent results and quiet operation but say it frequently jams and needs more cleaning than expected. Grinding only dry, non-flavored beans and brushing the chute regularly helps any grinder.

Can either one grind for espresso?

Not the Ode. Fellow is explicit that the Ode Gen 2 is designed for brewed coffee only, and its grind range starts around 250 to 300 microns, which is fine for AeroPress and pour-over but too coarse for espresso.

The Encore can reach the fine end of its range, and Baratza describes it as suitable for espresso, but it is not designed for the tiny adjustments espresso needs between shots. If espresso is part of the plan, look at the Encore ESP instead.

Our Baratza Encore vs Encore ESP comparison explains the difference; the Baratza Encore ESP adds a finer espresso range. If you want one grinder for both brewed coffee and espresso with a premium build, the Fellow Opus 2 is Fellow’s all-purpose conical model.

Durability, repairs and warranty

The Encore’s long-standing advantage is repairability. Baratza sells replacement parts and the burrs come out without tools for cleaning, so a worn switch or burr does not mean a new grinder. Its spec sheet also describes a thermal cutout that protects the motor and a calibration system you can adjust yourself.

The Ode Gen 2 has the longer warranty: 2 years as standard, plus a third year if you register it in the US, according to Fellow. Both grinders have owners reporting problems in Amazon’s summaries (early failures and clogging for the Encore, jamming for the Ode), so buy from a seller with easy returns and register the grinder when it arrives.

Comparing the Encore with other mainstream options? See our Baratza Encore vs OXO Brew comparison.

The complete reviews

Fellow Ode Brew Grinder Gen 2 (64 mm flat burrs)

Best for Daily Pour-Over and Drip (Single Dose)

According to Fellow and the Amazon listing, the Ode Gen 2 uses 64 mm stainless steel flat burrs with a two-stage grinding geometry, 11 settings with 31 total steps for pour-over, drip, AeroPress, French press and cold brew, a 100 g single-dose load bin, anti-static technology, a built-in knocker, a magnetically aligned catch cup, a grind guide under the lid and an automatic stop. It draws 140 W, weighs 4.6 kg and is not intended for espresso.

For someone who weighs beans and brews a pour-over or a batch of drip every morning, the Ode Gen 2 is the more refined tool: more uniform grounds, less static mess and a press-and-walk-away workflow. Serious Eats used it daily for four months, measured a tighter grind distribution than a well-regarded conical grinder and recommends it.

It costs considerably more than the Encore, it cannot do espresso, and Amazon’s customer summary includes jamming and cleaning complaints alongside praise for consistency and quiet running. Some see it as overpriced; it makes most sense for people who will notice clearer flavors in light roasts.

Who it’s for: Pour-over, drip, AeroPress and French press drinkers who grind one dose at a time and want flat-burr consistency, low mess and a quiet grind.

Who it’s not for: Espresso drinkers (Fellow says it does not grind for espresso) and anyone who wants a hopper that holds several days of beans.

Chooselio graphic for Fellow Ode Gen 2

Pros

  • Very consistent grind for brewed coffee
  • Anti-static system that reviewers found works
  • Auto stop and grind guide

Cons

  • Not for espresso
  • Single dose only, no hopper
Check Price on Amazon →

Baratza Encore Conical Burr Grinder (ZCG485)

Best Value and Most Repairable

According to Baratza’s spec sheet and the Amazon listing, the Encore uses 40 mm European-made conical burrs driven by a DC motor through a gear reduction, turning the burr at about 550 rpm to keep heat, noise and static down. You change the grind by turning the hopper across 40 settings covering 250 to 1,200 microns, and it has an on/off switch, a front pulse button, a 300 g (10.6 oz) hopper, a 120 g (4.2 oz) grounds bin with a fill line, a thermal cutout, user calibration and a 1-year warranty.

The Encore is the grinder most people should start with: it is simple, fits under cabinets, handles every brewed method well and can be repaired with parts from Baratza. It also suits households where several people grind straight from the hopper without weighing.

Amazon’s customer summary says owners praise the consistent results and easy adjustment, while noise, cleaning and value get mixed feedback and some report failures after two to six months or clogging. Its conical burrs give a wider spread of particle sizes than the Ode’s flat burrs, which matters most with light roasts.

Who it’s for: First-time burr grinder buyers who brew drip, pour-over or French press and want a proven, repairable grinder with a bean hopper.

Who it’s not for: Espresso-focused buyers (look at the Encore ESP) and anyone who wants the lowest noise and lowest retention.

Chooselio graphic for Baratza Encore

Pros

  • Much lower cost
  • Hopper for grab-and-go grinding
  • Repairable, with parts available

Cons

  • Shorter 1-year warranty
  • Less uniform than flat burrs
Check Price on Amazon →

Frequently Asked Questions

Can the Fellow Ode Gen 2 grind espresso?

No. Fellow says the Ode Gen 2 is designed for brewed coffee methods such as pour-over, drip, AeroPress, French press and cold brew, and does not grind for espresso. Its grind range starts at roughly 250 to 300 microns. For espresso, look at a grinder like the Baratza Encore ESP or Fellow Opus.

Is the Fellow Ode Gen 2 worth it over the Baratza Encore?

It is worth it if you brew pour-over or drip daily, weigh your beans and want flat-burr precision with less mess; Serious Eats measured a notably tighter grind distribution and clearer flavors with light roasts. If you want a hopper, lower cost and easy repairs, the Encore remains the better value.

How do you clean the Fellow Ode Gen 2?

Brush out the grind chute and burr area regularly, use the built-in knocker to clear retained grounds, and follow the cleaning steps in Fellow’s manual for anything deeper. Serious Eats found the chute needed brushing after about three months to keep the anti-static system working well. Keep water away from the burrs and motor.

Is the Baratza Encore good for pour-over?

Yes. The Encore’s 40 settings cover the medium-fine range pour-over needs, and its Amazon listing names Hario V60 and Chemex among the methods it is built for. A flat-burr grinder like the Ode Gen 2 can give more uniform grounds, which some people taste as extra clarity with light roasts.

Conclusion

If you want one dependable grinder for everyday brewing, a bean hopper and easy repairs, buy the Baratza Encore. If you weigh and single-dose your beans, brew pour-over or drip every day and want the cleanest, most precise grind for brewed coffee, the Fellow Ode Gen 2 is the upgrade, as long as you do not need espresso. Pair either with a scale, keep the chute clean, and check current prices on Amazon before you buy.

Back to Quick Picks ↑

Leave a Comment