WINTER HEATING
Best Bathroom Space Heaters (2026): 4 ALCI-Plug, Wall and Ceiling Picks, Plus the Safety Rules That Matter
Stepping out of a hot shower into a cold bathroom is one of winter’s small miseries, and a small heater is the obvious fix. But a bathroom is the one room where an ordinary space heater can be genuinely dangerous: water, steam, wet hands and outlets all share a small space. That is why this guide is as much about safety as it is about products. We explain the difference between a GFCI outlet and the ALCI plug found on bathroom-rated heaters, what an IP24 splash rating means, where a heater can and cannot go, and when a hardwired ceiling heater is the better answer. Then we compare four options sold on Amazon in the U.S.: the compact Lasko CD08200 bathroom heater, a DREO ceramic heater with an ALCI plug, a DREO wall-mounted heater rated IP24, and the Broan-NuTone 765H110L ceiling fan, light and heater combination. We did not test these heaters ourselves; specifications and warnings come from the makers, their manuals and the Amazon listings, and safety guidance comes from the CPSC, NFPA and the Electrical Safety Foundation International.
Disclosure: This post contains affiliate links. If you buy through these links, we may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Quick Picks

Lasko CD08200 Bathroom Heater
Best Overall for Small Bathrooms
Lasko CD08200: 1,500 W ceramic, ALCI safety plug, high and low heat, Simple Heat button for 1 hour of high heat, about 8 inches tall, 100 sq ft rating, 3-year warranty.
Pros
- ALCI plug and ETL listing
- Tiny footprint
Cons
- No thermostat

DREO ALCI Bathroom Heater
Best Plug-In With a Thermostat and Remote
DREO ALCI ceramic heater: 1,500 W PTC, ALCI plug, tip-over and overheat protection, 3 heat levels, digital thermostat, 70° oscillation, 12-hour timer, remote, as quiet as 34 dB.
Pros
- ALCI plug plus tip-over protection
- Digital thermostat
Cons
- Larger footprint than the Lasko

DREO IP24 Wall Heater
Best Wall-Mounted Pick
DREO smart wall heater: ALCI plug, IP24 splash rating, PTC heat, thermostat 41 to 95°F, ECO mode, adjustable louver, remote, app and Alexa control, plug-in cord about 71 inches.
Pros
- IP24 splash rating plus ALCI plug
- Off the floor and counter
Cons
- Requires drilling
How we chose
We did not run lab or hands-on tests for this guide. Instead we read each product’s Amazon listing and the manufacturer’s published specifications, then looked for patterns in the customer feedback summaries that Amazon shows on each listing. Where a listing gives a number, we repeat it as the listing’s claim. Where we could not find reliable details, we say so rather than guess.
We checked every Amazon listing below on November 13, 2026. We only considered heaters that the maker specifically designs or markets for bathroom use: plug-in models with an ALCI (appliance leakage current interrupter) safety plug, a wall unit with a stated splash rating, and a hardwired ceiling unit from an established ventilation brand. We read Lasko’s operating manual, Broan-NuTone’s specifications, the Amazon listings and Amazon’s customer summaries, and checked the safety guidance from the CPSC, NFPA and ESFI. We also looked at what people ask most: whether you can use a space heater in a bathroom at all, whether it is safe while showering, and what to look for in a bathroom-safe model.
Read more about our method on our How We Research page.
The short answer
For most small bathrooms, the Lasko CD08200 is the simplest safe choice: a compact 1,500-watt ceramic heater with an ALCI safety plug, two heat settings and a one-touch, one-hour high-heat button. If you want a thermostat, oscillation and a remote, the DREO ALCI heater is the more capable plug-in. If floor and counter space are tight, the DREO IP24 wall heater mounts out of the way. For a permanent solution in a remodel, the Broan-NuTone 765H110L combines an exhaust fan, light and heater in the ceiling, but it must be hardwired by an electrician.
For general heater safety, read our how to choose a safe space heater guide and the Winter Heating Guide.
Can you use a space heater in a bathroom?
Only a heater designed for it, used the way its manual says. The CPSC, Reducing Fire Hazards for Portable Electric Heaters (PDF) tells consumers to keep electric heaters away from water and never to touch one when you are wet. Lasko’s Lasko CD08200 operating manual (PDF) for its bathroom heater goes further: when it is used in a bathroom, it must be plugged into a GFCI outlet as required by the National Electrical Code, it must never be used with an extension cord or power strip, and even with its ALCI protection the product should never be used near water.
Put simply, a bathroom-rated heater reduces the risk of electric shock; it does not make it safe to put a heater where it can be splashed, knocked into a tub or touched from the shower. Ordinary space heaters without bathroom ratings should stay out of bathrooms entirely; check the warnings in any heater’s manual before you use it there.
| Do | Do not |
|---|---|
| Plug directly into a GFCI-protected wall outlet | Use an extension cord, power strip or outlet adapter |
| Place it on a dry, flat surface well away from the tub, shower and sink | Put it where it could fall into water or be splashed |
| Warm the room before your shower, then switch it off and unplug it | Leave it running unattended or while you sleep |
| Test the ALCI plug and the GFCI outlet regularly | Touch the heater or its plug with wet hands |
| Keep towels, bath mats and robes at least 3 feet away | Dry towels or clothes on or near the heater |
The 3-foot clearance rule and the advice to switch heaters off when you leave the room or go to sleep come from the NFPA electric portable space heater safety tip sheet.
GFCI, ALCI and IP ratings explained
A GFCI (ground-fault circuit interrupter) is a special outlet or breaker that cuts power in a fraction of a second when current leaks to ground, for example through water or a person. According to Electrical Safety Foundation International, How to Use GFCIs, GFCIs are required in bathrooms and other wet areas, and ESFI credits them with a 95% drop in electrocutions caused by consumer electronics. ESFI recommends testing them by pressing TEST (the power should cut off) and then RESET; if either does not work, the GFCI should be replaced.
An ALCI (appliance leakage current interrupter) is a similar device built into the heater’s plug, the same kind of bulky plug you see on hair dryers. Lasko’s manual explains how to test it: switch the heater on, press TEST on the plug, check that the heater and fan stop, then press RESET. If the heater stops working unexpectedly, a tripped ALCI is one of the first things to check. An ALCI is extra protection, not a substitute for a GFCI outlet.
IP ratings describe protection against solids and water. In an IP24 rating, the 2 means fingers cannot reach dangerous parts and the 4 means the unit resists water splashed from any direction. It is not waterproof and does not make a heater safe to install in a shower or directly above a tub; follow the installation distances in the manual.
How much heat does a bathroom need?
Most plug-in bathroom heaters are 1,500 watts on high, the usual maximum for heaters that plug into a standard 120-volt outlet. Lasko rates the CD08200 for rooms up to 100 sq ft and Broan recommends its 765H110L for bathrooms up to about 105 sq ft. Many bathrooms are smaller than that, so any of these should warm one quickly; what differs is control, placement and convenience.
Because you only need heat for 15 to 30 minutes at a time, a timer is more useful in a bathroom than almost anywhere else. The Lasko’s first button press runs high heat for one hour and then shuts off; the DREO models have a thermostat and longer timers.
Wondering what a 1,500-watt heater costs to run? Our space heater running cost page shows hourly cost at the U.S. average electricity rate.
Placement tips that actually matter
Choose the outlet first. If the only outlet is beside the sink or bathtub, a plug-in heater may not be a good idea in that room at all; a wall-mounted unit placed by its instructions or a hardwired ceiling heater is the safer route.
Floor or counter? A small heater like the Lasko can sit on a counter away from the sink, which keeps it out of the way of feet and bath mats. A tower or floor heater should sit on a hard, level floor where nobody will step over its cord.
Run the bathroom exhaust fan as usual to clear steam; a heater warms the room but does not remove moisture. If mold or condensation is a problem, ventilation is the fix.
Bathrooms are often cold because of drafts. Our winter draft-proofing checklist covers quick fixes for windows and doors.
The complete reviews
Lasko CD08200 Ceramic Bathroom Heater with ALCI Safety Plug
Best Overall for Small Bathrooms
According to Lasko’s product page, manual and the Amazon listing, the CD08200 is a 1,500-watt ceramic heater (900 W on low) with an integrated ALCI safety plug, automatic overheat protection, a self-regulating ceramic element and a cool-touch exterior. It stands under 8 inches tall on a 6.25 x 6.25-inch footprint, weighs 3.35 lb, has a 6-foot cord, is ETL listed, is rated for rooms up to 100 sq ft and carries a 3-year limited warranty. One button cycles through high heat for one hour, steady high, low and off.
The Lasko is the heater we would put in most bathrooms: small enough for a counter or shelf, nothing to program, and designed with bathroom use in mind. Tap the button before you shower and it runs high for an hour, then shuts itself off.
Amazon’s customer summary says owners find it warms bathrooms quickly, like its compact size and consider it good value. Some are surprised that it shuts off after an hour while others say it runs continuously; that depends on how many times you press the button. Lasko’s manual says to vacuum the intake grills every two weeks.
Want a fan-only mode for summer? Lasko also makes the CD08210, which adds one; see the Lasko CD08210 product page.
Who it’s for: Small bathrooms where you want a simple, compact plug-in heater with an ALCI plug, a 1-hour high-heat button and nothing to set up.
Who it’s not for: Bathrooms without a GFCI-protected outlet, rooms over about 100 sq ft, or anyone who wants a thermostat; it has heat settings, not a set temperature.

Pros
- ALCI plug and ETL listing
- Tiny footprint
- One-hour auto-off high heat
Cons
- No thermostat
- No remote
DREO 1500W Ceramic Space Heater with ALCI Safety Plug for Bathroom Use
Best Plug-In With a Thermostat and Remote
According to the Amazon listing, this DREO heater has an ALCI plug, V-0 flame-retardant housing, overheat and tip-over protection, a PTC ceramic element with three heat levels, 70° oscillation, a digital thermostat that varies output between 1,000 and 1,500 W to hold the set temperature, a 12-hour timer, a dimmable display, top-mounted controls and a remote that works up to 26 feet away. DREO quotes noise as low as 34 dB.
If your bathroom is larger, or you want one heater that moves between the bathroom and a bedroom, the DREO’s thermostat and oscillation make it more versatile than the Lasko. Setting a temperature rather than just high or low also avoids overheating a small room.
Amazon’s customer summary says owners find it heats quickly and evenly and runs quietly; value opinions are split, and while some find it safe, others report safety concerns. The listing does not give a water-resistance rating or room-size figure, so keep it on a dry floor well away from water, as with any plug-in heater.
We reviewed a close sibling without the ALCI plug in our DREO space heater review.
Who it’s for: Larger bathrooms or bathroom-plus-bedroom use where you want a thermostat, oscillation, a remote and a 12-hour timer, plus an ALCI plug.
Who it’s not for: Very small bathrooms where its footprint gets in the way, or buyers who want a listed water-resistance rating; the listing gives none.

Pros
- ALCI plug plus tip-over protection
- Digital thermostat
- Oscillation and remote
Cons
- Larger footprint than the Lasko
- No stated IP rating or room size
DREO Smart Wall-Mounted Heater with ALCI Plug, IP24
Best Wall-Mounted Pick
According to the Amazon listing, this DREO wall heater has an ALCI plug, an IP24 rating, flame-retardant materials and overheat protection, a PTC heating system with a louver you can tilt 15° up or down, three modes including ECO, a thermostat adjustable from 41 to 95°F in single degrees, a touch panel, a remote, DREO app and Alexa control, and a drilling template for installation. It plugs in with a cord of about 70.8 inches; the listing title quotes operation as quiet as 28 dB.
Mounting a heater on the wall keeps it off wet floors and crowded counters, out of reach of small children and away from towels on the floor. The IP24 rating adds splash resistance that ordinary plug-in heaters lack, and schedules in the app mean the bathroom can be warm before your alarm goes off.
Amazon’s customer summary says owners find it heats quickly, keeps temperature well even on very cold days, is easy to install and very quiet; reliability is mixed, with some units stopping after about eight weeks. You still need a GFCI-protected outlet within reach of the cord, and you will be drilling into the wall.
Who it’s for: Bathrooms with little floor space where you want a heater mounted on the wall, a splash rating (IP24), a thermostat and app or remote control.
Who it’s not for: Renters who cannot drill into tile or walls, or bathrooms where the only outlet is next to the tub or shower.

Pros
- IP24 splash rating plus ALCI plug
- Off the floor and counter
- Thermostat, app and schedules
Cons
- Requires drilling
- Cord must reach a GFCI outlet
Broan-NuTone 765H110L Ceiling Fan, Light and 1500 W Heater
Best Permanent (Hardwired) Option
According to Broan-NuTone, the 765H110L combines a 110 CFM exhaust fan rated at 2.0 sones, a 1,500-watt heater with a directionally adjustable grille and a light fixture (bulb not included) in one ceiling unit. It is recommended for bathrooms up to 105 sq ft, runs on 120 V at 14 A, uses a 4-inch duct, is UL listed for insulated ceilings (Type IC), needs at least 2 x 6 ceiling construction and has a 1-year warranty. Broan’s specifications say it is not UL listed for use over a bathtub or shower.
A hardwired heater is the most permanent fix: no cord, no outlet, nothing on the floor, and an exhaust fan in the same unit to clear steam. It is a job for a licensed electrician, not a weekend plug-in, and the 14-amp heater draw means your electrician should check the circuit. Full details are on the Broan-NuTone 765H110L product page.
The Amazon listing is thin and has no customer summary, so we relied on Broan-NuTone’s specifications. Choose it if you are remodeling or replacing an existing ceiling fan, and plan the location so the heater is not directly over the tub or shower.
Who it’s for: Remodels and bathrooms where you want permanent, hardwired heat combined with an exhaust fan and light, installed by an electrician.
Who it’s not for: Renters or anyone without an electrician; it must be hardwired, it is not listed for use over a tub or shower, and its heater draws 14 A.

Pros
- Fan, light and heat in one
- Nothing on the floor or counter
- Directional heater grille
Cons
- Must be hardwired by an electrician
- Not for use over a tub or shower
Frequently Asked Questions
Can you use a space heater in a bathroom?
Only one designed for bathroom use, plugged directly into a GFCI-protected outlet and kept well away from water, as Lasko’s manual and the CPSC advise. Do not use extension cords, do not leave it running unattended and keep towels at least 3 feet away. Ordinary space heaters without bathroom ratings should not be used there.
Is it safe to run a space heater while showering?
It is safest to warm the bathroom before you shower and switch the heater off before you get in. If you leave it running, it must be a bathroom-rated heater on a GFCI outlet, positioned where water cannot reach it, and you should not touch it until you are dry, in line with CPSC advice.
What is an ALCI plug on a space heater?
An ALCI (appliance leakage current interrupter) is a shock-protection device built into the plug, similar to the plug on a hair dryer. It cuts power if it detects current leakage. Test it by pressing TEST while the heater runs (it should stop) and then RESET. It adds to, but does not replace, a GFCI outlet.
What size heater do I need for a bathroom?
Most bathrooms are small, so a 1,500-watt heater is usually plenty: Lasko rates its CD08200 for up to 100 sq ft and Broan recommends its 765H110L ceiling heater for up to about 105 sq ft. In a bathroom, a timer or thermostat matters more than extra power.
Conclusion
For most small bathrooms, buy the Lasko CD08200: compact, ALCI-protected and designed for exactly this job, with a one-hour high-heat button. Choose the DREO ALCI heater if you want a thermostat, oscillation and a remote, the DREO IP24 wall heater if floor and counter space are tight, and the Broan-NuTone 765H110L if you are remodeling and want hardwired heat with a fan and light. Whatever you choose, plug into a GFCI outlet, keep it away from water and towels, never use an extension cord, and switch it off when you leave the room. Check current prices on Amazon before you buy.