HEATING HOW-TO
Space Heater Keeps Tripping the Breaker? Why It Happens and How to Fix It Safely (2026)
It is one of the most common winter frustrations: you switch on a space heater, the room starts to warm up, and a few minutes later the lights go out because the breaker tripped. Usually nothing is broken. A typical space heater is one of the most power-hungry things you can plug into an ordinary outlet, and many bedroom and living room circuits simply can’t carry a full-power heater plus a TV, lamps, a computer or a second heater for hours at a time. Sometimes, though, a trip is a warning sign of a faulty heater, a worn outlet or a wiring problem, and that is not something to ignore. This guide explains the simple math behind breaker trips, how to tell an overloaded circuit from a fault, the fixes that work (and the dangerous ones that don’t), and which heaters and tools make it easier to stay warm on a busy circuit. We did not test these products ourselves; product details come from the makers and the Amazon listings, and safety guidance comes from the Electrical Safety Foundation International (ESFI), the NFPA and the CPSC. This is general guidance, not a substitute for a licensed electrician.
Disclosure: This post contains affiliate links. If you buy through these links, we may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Quick Picks: Heaters and Tools That Help

DREO Oil-Filled Radiator
Best Low-Wattage Heater for a Busy Circuit
DREO Oil-Filled Radiator: 600 W, 900 W and 1,500 W modes plus Eco, digital thermostat, 24-hour timer, remote, child lock, tilt and triple overheat protection, ETL listed, quiet fan-free heat.
Pros
- 600 W mode (about 5 A)
- Quiet, fan-free
Cons
- Slow to warm up

Lasko 755320 Tower
Best Ceramic Tower With a Low Setting
Lasko 755320 digital ceramic tower: 1,500 W high and 900 W low (5,118 BTU on high), thermostat, remote, 8-hour timer, oscillation, overheat protection, cool-touch housing, ETL listed, 3-year warranty, rooms up to about 150 sq ft.
Pros
- 900 W low setting
- Fast warm-up
Cons
- Nothing below 900 W

Lasko 754201 Tabletop Heater
Best for Small Spaces
Lasko 754201 ceramic heater: 1,500 W high, 900 W low and fan-only, thermostat, tip-over switch, overheat protection, cool-touch housing, 9.2 inches tall and under 3 pounds, 6-foot cord, ETL listed, 3-year warranty.
Pros
- 900 W low setting
- Tiny and portable
Cons
- Only for small spaces
How we researched this
We did not run lab or hands-on tests for this guide. Instead we read each product’s Amazon listing and the manufacturer’s published specifications, then looked for patterns in the customer feedback summaries that Amazon shows on each listing. Where a listing gives a number, we repeat it as the listing’s claim. Where we could not find reliable details, we say so rather than guess.
We checked every Amazon listing below on November 15, 2026. We used safety guidance from ESFI, the National Fire Protection Association and the U.S. Consumer Product Safety Commission, and Schneider Electric’s published explanation of how standard breakers are applied to continuous loads. We chose heaters whose listings state a low-wattage setting (600 or 900 W) and an electricity monitor from an established maker, and left out heaters whose low-setting wattage we could not confirm. We also looked at what people ask most: why a heater trips the breaker, how many amps a 1,500-watt heater uses, whether a power strip is safe and whether two heaters can share a circuit.
Read more about our method on our How We Research page.
The short answer
Most portable electric heaters draw 1,500 watts on high. At 120 volts that is 12.5 amps (watts divided by volts). Many bedroom and living room circuits are protected by a 15-amp breaker, and other outlets and lights often share that same circuit. Add a TV, a computer, a vacuum or a second heater and the total quickly passes 15 amps, so the breaker trips, exactly as it is designed to.
There is a second reason it can trip after a while rather than instantly. Standard breakers are applied to continuous loads, those running for three hours or more, at no more than 80 percent of their rating; Schneider Electric’s FAQ cites the National Electrical Code sections behind that rule. On a 15-amp circuit that is 12 amps continuous, and a 1,500-watt heater alone is already slightly above it. See the Schneider Electric FAQ on 80% and 100% rated breakers.
| Heater setting | Approximate current at 120 V | Share of a 15-amp circuit |
|---|---|---|
| 600 W | 5.0 A | 33% |
| 750 W | 6.3 A | 42% |
| 900 W | 7.5 A | 50% |
| 1,500 W | 12.5 A | 83% |
| Two 1,500 W heaters | 25 A | 167% (will trip) |
The quickest safe fixes are to unplug other devices on that circuit, switch the heater to its low setting, or move it to an outlet on a different circuit. If a heater trips the breaker the moment it switches on, even on its own, stop using it.
Overload or fault? How to tell
| What happens | Most likely cause | What to do |
|---|---|---|
| Trips after several minutes, only with the heater on high and other things running | Circuit overload | Unplug other loads, use low, or move the heater to another circuit |
| Trips the moment the heater switches on, even with nothing else running, on more than one circuit | Fault in the heater | Stop using it; contact the maker or replace it |
| A bathroom, kitchen or garage outlet with Test/Reset buttons cuts out, but the panel breaker stays on | The outlet’s GFCI protection tripped | Press Reset once; if it keeps tripping with the heater, stop and have it checked |
| The plug, cord or outlet feels hot, looks discolored or smells of burning | Poor connection or damaged wiring | Stop using that outlet and call a licensed electrician |
| The heater shuts off but the lights stay on | The heater’s own safety switch (tip-over or overheat) | Check placement and airflow; see the manual |
Inspect the heater before each use. ESFI advises checking for cracked or broken plugs and loose connections before each use, and not using a heater that is frayed, worn or damaged. See Electrical Safety Foundation International, Space Heater Safety Tips.
Bathroom heaters have their own rules; see our best bathroom space heaters guide.
Step 1: Find out what else is on the circuit
Breakers don’t protect a single outlet; they protect a circuit that can feed several outlets and lights, sometimes in more than one room. To map it, plug a lamp into the outlet you want to use, switch off the breaker that trips, and walk around noting every outlet, light and appliance that goes dead. Label the panel while you are there.
Then add up what runs at the same time. A plug-in electricity monitor such as the Kill A Watt shows the actual watts and amps a device draws, which is often less than the label on a TV or computer and much more for things like a dehumidifier or hair dryer. Use it to measure the other devices, not as a permanent adapter for the heater.
If the total with the heater on high is above about 12 amps for hours at a time, or near 15 amps at any moment, you have found the problem.
Step 2: Safe fixes that work
Unplug or switch off other loads on that circuit while the heater runs, especially other heaters, hair dryers, vacuums, microwaves, coffee makers and electric kettles.
Use the low setting. Most 1,500-watt heaters have a lower setting; at 900 W a heater draws about 7.5 amps, and at 600 W about 5 amps. Let the thermostat cycle the heater rather than leaving it on high.
Move the heater to an outlet on a different, less busy circuit. Your panel labels, or the lamp test above, will tell you which outlets are separate.
Plug the heater straight into a wall outlet. ESFI says not to use an extension cord or power strip, which could overheat and start a fire, and not to plug any other electrical devices into the same outlet as the heater. The NFPA electric portable space heater safety tip sheet includes a heater safety checklist worth printing.
Heat a smaller space. Close the door, block drafts and heat only the room you are in; a heater that reaches its set temperature cycles off more often and draws less on average.
See our winter draft-proofing checklist and how to heat a large room with a space heater.
What not to do
Never replace a breaker with a larger one to stop it tripping. A breaker is sized to protect the wire in the wall; a bigger breaker lets that wire overheat instead of shutting off. Breaker work belongs to a licensed electrician.
Don’t keep resetting a breaker that trips repeatedly with the same heater and nothing else running. That points to a fault.
Don’t run two 1,500-watt heaters on the same 15-amp circuit; together they draw about 25 amps.
Don’t leave a heater running when you leave the room or go to sleep, keep it at least three feet from anything that can burn and set it on a level, flat surface, never on furniture or carpet, as ESFI advises. ESFI also notes that heating equipment is the second leading cause of home fires in the U.S. The CPSC, Reducing Fire Hazards for Portable Electric Heaters (PDF) has more placement and safety guidance.
When to call an electrician
Call a licensed electrician if an outlet or plug gets hot, looks scorched or discolored, or smells of burning; if the breaker trips with only the heater running on low; or if lights dim sharply whenever the heater cycles on.
If you need full heat in one room every day, ask about a dedicated circuit. Using the same 80 percent rule, a 20-amp circuit can carry 16 amps continuously, comfortably above a 1,500-watt heater’s 12.5 amps. For a garage or workshop, a hardwired heater on its own circuit is often the better solution.
See our best electric garage heaters and how to choose a safe space heater.
A note on running cost
Low settings also cost less per hour: a heater on 900 W uses 0.9 kWh per hour, versus 1.5 kWh on high. In a small, well-sealed room, the thermostat will switch the heater off for part of each hour, so the real cost is lower than the rated maximum.
To turn kilowatt-hours into dollars at your rate, use our space heater running cost page, and see the Winter Heating Guide for more ways to stay warm.
The complete reviews
DREO Oil-Filled Radiator Heater with Remote and 24-Hour Timer
Best Low-Wattage Heater for a Busy Circuit
According to the Amazon listing, this DREO oil-filled radiator offers 600 W, 900 W and 1,500 W modes plus an Eco mode, a large LED display with touch controls and a remote, a 24-hour timer, child lock, mute and screen-off modes, and large wheels and handles. DREO lists triple overheat protection, tilt protection, fire-resistant material and an ETL listing.
The 600-watt mode is the reason it is here: at about 5 amps it leaves most of a 15-amp circuit free for lamps, a TV or a laptop. Oil-filled radiators are slow to warm up, but once hot they keep radiating heat while the thermostat has the element switched off, which suits a bedroom you heat for hours.
Amazon’s customer summary says owners find it effective and dead quiet compared with ceramic heaters and like the remote. Some say it heats small rooms well but struggles in large ones, and opinions on temperature control are mixed.
Compare heater types in our oil-filled radiator vs ceramic heater guide.
Who it’s for: Anyone fighting a busy 15-amp circuit: its 600 W mode draws about 5 amps, and the oil keeps radiating heat between thermostat cycles.
Who it’s not for: Rooms that need fast heat; oil radiators warm up slowly, and some owners in Amazon’s summary say it struggles in large rooms.

Pros
- 600 W mode (about 5 A)
- Quiet, fan-free
- Thermostat, timer and remote
Cons
- Slow to warm up
- Struggles in large rooms
Lasko 755320 Digital Ceramic Tower Heater with Remote
Best Ceramic Tower With a Low Setting
According to the Amazon listing, this Lasko tower has 1,500 W high and 900 W low settings (5,118 BTU on high), a thermostat with a digital display, and a remote that adjusts the thermostat and oscillation and sets the auto-off timer for up to 8 hours. It is 23 inches tall, weighs about 7 pounds, has automatic overheat protection and a cool-touch housing, is ETL listed and carries a 3-year warranty. The listing rates it for rooms up to about 150 sq ft and tells you to plug it directly into a wall outlet.
Its 900 W low setting draws about 7.5 amps, half of a 15-amp circuit, and in a small bedroom the thermostat can often hold temperature on low. It also warms a room much faster than an oil-filled radiator.
Amazon’s customer summary says owners find it heats up quickly, runs quietly, has a simple remote and is good value; the thermostat gets mixed feedback (some say it only works on high), and some units stopped working suddenly.
Read our full Lasko 755320 review.
Who it’s for: Bedrooms and home offices up to about 150 sq ft where you want a 900 W low setting, a thermostat, a remote and an 8-hour timer.
Who it’s not for: Larger living rooms, or anyone whose circuit can’t spare even 900 W; it has no setting below 900 W.

Pros
- 900 W low setting
- Fast warm-up
- Remote, timer and thermostat
Cons
- Nothing below 900 W
- Thermostat complaints
Lasko 9-Inch Tabletop Ceramic Space Heater with Thermostat (754201)
Best for Small Spaces
According to the Amazon listing, this 9.2-inch Lasko heater has 1,500 W high and 900 W low settings plus a fan-only mode, a thermostat with simple manual controls on top, a tip-over switch, overheat protection and a cool-touch housing. It weighs under 3 pounds, has a built-in carry handle and a 6-foot cord, is ETL listed, carries a 3-year warranty and is rated for spaces up to about 100 sq ft.
For warming a small bedroom or the floor space near a desk, the 900 W setting is often enough, and it leaves room on the circuit for a computer and monitor. Keep it on a level, flat surface at least three feet from papers and fabric; ESFI advises against setting heaters on tables or furniture.
Amazon’s customer summary says owners find it warms small rooms quickly for its size and like its safety features; noise and value are mixed, and some units broke within months.
Who it’s for: Small rooms and the floor space near a desk, up to about 100 sq ft, with a 900 W low setting, fan-only mode and simple dials.
Who it’s not for: Whole bedrooms or living rooms; it is rated for up to about 100 sq ft, and some owners find it loud.

Pros
- 900 W low setting
- Tiny and portable
- Tip-over switch
Cons
- Only for small spaces
- Noise complaints
P3 Kill A Watt P4400 Electricity Usage Monitor
Best Tool to Find the Problem
According to P3 and the Amazon listing, the Kill A Watt P4400 sits between an outlet and an appliance and shows volts, amps, watts, line frequency, VA and power factor, and counts kilowatt-hours over time so you can estimate running costs. P3 lists 0.2 percent accuracy and a maximum of 15 amps, 1,875 VA and 125 VAC.
It answers the key question quickly: what is actually running on this circuit? Measure the TV, computer, dehumidifier or anything else that shares the circuit with your heater, add up the amps, and you will know how much room is left.
Use it for measuring, then unplug it. ESFI says to plug space heaters directly into a wall outlet and not to plug other devices into the same outlet, so don’t leave a heater running through any adapter. Amazon’s customer summary says owners find it easy to use, but some say the display is hard to read in the dark and a few units died early. See the P3 International Kill A Watt P4400 page.
Who it’s for: Anyone who wants to see what the other devices on a circuit actually draw, in watts and amps, before deciding where the heater goes.
Who it’s not for: Use as a permanent adapter for a space heater; ESFI says to plug heaters straight into a wall outlet. Its display can also be hard to read in low light.

Pros
- Shows real watts and amps
- Tracks kWh over time
- Simple to use
Cons
- Not for permanent use with a heater
- Display hard to read in low light
Frequently Asked Questions
Why does my space heater keep tripping the breaker?
Usually because the circuit is overloaded. A 1,500-watt heater draws about 12.5 amps at 120 volts, and many bedroom and living room circuits are 15 amps shared with other outlets and lights. Unplug other devices, use the heater’s low setting or move it to another circuit. If it trips instantly with nothing else running, the heater may be faulty, so stop using it.
How many amps does a 1,500-watt space heater use?
About 12.5 amps at 120 volts (1,500 divided by 120). On a 900-watt low setting it draws about 7.5 amps, and on 600 watts about 5 amps. Check the heater’s label for its exact rating.
Can I plug a space heater into a power strip or extension cord?
No. ESFI says to plug space heaters directly into a wall outlet, because power strips and extension cords can overheat and start a fire. ESFI also advises not plugging other devices into the same outlet as the heater.
Can two space heaters be on the same circuit?
Not two 1,500-watt heaters on a typical 15-amp circuit: together they draw about 25 amps, well over the breaker’s rating. Put them on separate circuits, or run both on low only if the total, including everything else on the circuit, stays well under the limit.
Conclusion
A space heater that trips the breaker is usually doing exactly what the math predicts: 1,500 watts is 12.5 amps, which leaves little room on a shared 15-amp circuit. Find out what else is on the circuit, unplug what you don’t need, use a lower setting such as the DREO’s 600 W or the Lasko’s 900 W mode, or move the heater to another circuit, and always plug it straight into the wall. Never install a bigger breaker, and call a licensed electrician if a heater trips the breaker on its own or an outlet gets hot. Check current prices on Amazon before you buy.